Avaya Cajun P880 - Manual (Page 147)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-137
vsport
Command Mode
Configuration
Description
Create a Virtual Switched Port. Use the no form of this command to
delete a Virtual Switched Port.
Syntax
vsport [packet-rep {yes | no}] []
no vsport
Table 1-85. Arguments, Parameters, Keywords
Sample Output
The following example creates then deletes a Replicating Virtual
Switched Port named TestVSP with VSP ID 10.
ATM(configure)# vsport TestVSP packet-rep yes 10
ATM(configure)# no vsport 10
Name Definition
vsportName The name of the VSP. (1 to 32 characters)
packet-rep (Optional) Identifies the port as replicating,
when combined with the “yes” option and
non-replicating when combined with the “no”
option.
The Default value is Yes.
vsportId (Optional) The Virtual Switch Port Identifier.
Possible values range from 1 - 128. If omitted,
the ATM Uplink module will assign the next
lowest available number.