Avaya Cajun P880 - Manual (Page 24)

1-14
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set atm-link mapping
Command Mode
Configuration
Description
For the given ATM Link, this command maps an Ethernet priority to
a PVC.
* Note: All 8 Ethernet priorities should be mapped to a PVC.
Any traffic forwarded at an un-mapped Ethernet priority
will result in that traffic being dropped.
Syntax
set atm-link mapping {none | }
Table 1-11. Arguments, Parameters, Keywords
Sample Output
The following example maps Ethernet priority 6 to PVC 181 in the
TestLink ATM Link.
ATM(configure)# set atm-link TestLink mapping
0-2-300 6
PVC 2-0-300 has been set for priority 6 for
ATM Link TestLink
Name Definition
link-name The name of the ATM Link whose Ethernet
priorities being mapped.
Use th e show atm-link [
id>] to get the name of an ATM-Link whose
name is greater than 10 characters.
pvcId Virtual channel identifier. When a PVC is
created, the ATM Uplink module assigns the
vcID to the PVC. The format of the vcID is
-- (ex: 1-0-300)
Use the show pvc to display the
list of PVCs configured within the ATM Link
priority Priority for mapping. Range of values is 0 - 7.