Avaya Cajun P880 - Manual (Page 50)

1-40
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set lec (name)
Command Mode
Configuration
Description
Modifies a LEC name.
* Note: You must disable a LEC each time you make a change to
the configuration. After you make configuration
changes, you must enable the LEC in order for the
changes to take effect.
Syntax
set lec name
Table 1-31. Parameters, Keywords, Arguments
Sample Output
This example sets the name of LEC 1 to “dawes.”
ATM(configure)# set lec 1 disable
LEC 1 has been disabled
ATM(configure)# set lec 1 name dawes
Name dawes has been set for LEC 1
ATM(configure)# set lec 1 enable
LEC 1 has been enabled
Name Definition
lecID The LEC identifier. The range of values is:
Minimum = 1, Maximum = 128.
lecName The name you wish to assign to the LEC. The
LEC name must be between 1 and 31
characters (alpha or numeric).