Avaya Cajun P880 - Manual (Page 148)

1-138
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set vsport default-link
Command Mode
Configuration
Description
Sets the default ATM Link for the Virtual Switched Port identified by
vsportId. If you add a static AFT entry on the supervisor, a static
LAFT is automatically created bound to this Default ATM Link.
set vsport default-link
Table 1-86. Arguments, Parameters, Keywords
Sample Output
The following example sets the Default Link for VSP 4 to ATM Link
Link1.
ATM(Configure)# set vsport 4 default-link
Link1
Default ATM Link Link1 has been set for the
VSP 4.
Name Definition
vsportId Virtual Switched Port Identifier. Possible values
range from 1 - 128.
link-name Enter the name of an ATM Link configured
within this VSPort