Show interface, Command mode, Description – Avaya Cajun P880 User Manual
Page 39: Syntax, Sample output

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-29
show interface
Command Mode
All Modes
Description
Display ATM interface information. You can show both interfaces or
explicitly show physical port 1 or 2.
Syntax
show interface [
Table 1-22. Parameters, Keywords, Arguments
Sample Output
This example shows the configuration information for ATM
interface 1.
ATM(configure)# show interface 1
ATM Interface 1 Configuration:
==============================
Interface Name : thoreau
Admin Status : Enabled
Oper Status : Up
Medium Type : Sonet
Line Type : Multi-Mode Fiber
Path Width : STS12c
This example shows the configuration information for all configured
interfaces.
ATM(configure)# show interface
ATM Interface 1 Configuration:
==============================
Interface Name : thoreau
Admin Status : Enabled
Oper Status : Up
Medium Type : Sonet
Line Type : Multi-Mode Fiber
Path Width : STS12c
Name
Definition
interfaceID
The ATM interface identification number. The
range of values is: Minimum = 1, Maximum =
2 where 1 is Physical port 1 and 2 is physical
port 2.