Avaya Cajun P880 - Manual (Page 126)

1-116
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
reload
Command Mode
Configuration or Enable
Description
Reload the application software and reset the system. When
sessioned to the ATM Uplink module, this command resets just the
ATM Uplink module. Same as the reset command.
Syntax
reload
Example
This example shows the reload command. Note the module will
jump to the reset vector and the session to the module will be
terminated. Once the module has rebooted, you will have to re-
establish a session to it.
ATM(configure)# reload
Log entry 184 by event 2 at 00-May_23 19:50:27
: Alarm(60)
Description: Module reset detected : Module
6.[Module 6]
Jumping to the reset vector
[session terminated]