Avaya Cajun P880 - Manual (Page 20)

1-10
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
atm-link
Command Mode
Configuration
Description
Create an atm-link. Use the no form of this command to delete an
atm-link.
* Note: The Virtual Switch Port (VSP) that this ATM Link will
belong to must exist prior to creating the atm-link.
Syntax
atm-link
no atm-link
Table 1-7. Arguments, Parameters, Keywords
Sample Output
The following example creates then deletes an ATM link named
vsp1on the Virtual Switch Port whose ID is 4.
ATM(configure)# atm-link 4 vsp1
ATM Link VSP1 for VSPort 4 has been
successfully created
ATM(configure)# no atm-link vsp1
Name Definition
vsportId Virtual switch port Identifier. Range is 1 - 128.
link-name Virtual switch port name. (1 - 31 characters) If
using spaces in the name, surround the name
with quotation marks (“)