Avaya Cajun P880 - Manual (Page 52)

1-42
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set lec (qos-domain)
Command Mode
Configuration
Description
Set the Quality of Service (QoS) Domain for the LEC.
* Note: You must disable a LEC each time you make a change to
the configuration. After you make configuration
changes, you must enable the LEC in order for the
changes to take effect.
Syntax
set lec qos-domain
Table 1-33. Parameters, Keywords, Arguments
Sample Output
This example sets QOS Domain 1 for LEC 2.
ATM(configure)# set lec 2 disable
LEC 2 has been disabled
ATM(configure)# set lec 2 qos-domain 1
QOS Domain 1 has been set for LEC 2
ATM(configure)# set lec 2 enable
LEC 2 has been enabled
Name Definition
lecID The LEC identifier. The range of values is:
Minimum = 1, Maximum = 128.
qos-domain-value The QoS domain ID. Use the show qos-
domain command for a list of configured QoS
Domains.