Avaya Cajun P880 - Manual (Page 57)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-47
show lec
Command Mode
All Modes
Description
Display LEC configuration.
Syntax
show lec []
Table 1-38. Parameters, Keywords, Arguments
Sample Output
This example shows the configuration for all LECs.
* Note: The actual output contains additional columns for VLAN
ID and ProxyValue.
ATM(configure)# show lec
LEC Version LEC Admin Oper Join Client
ID Cfg/Oper Name Status Status Method Selector
---- -------- ---- -------- ------ ------ -------
1 V1/V1 thoreau Enabled Up LECS 11
2 V1/V1 j2 Enabled Up LECS 12
3 V1/V1 j3 Enabled Up LECS 13
4 V1/V1 j4 Enabled Up LECS 14
5 V1/V1 j5 Enabled Up LECS 15
6 V1/V1 j6 Enabled Up LECS 16
7 V1/V1 j7 Enabled Up LECS 17
8 V1/V1 j8 Enabled Up LECS 18
9 V1/V1 j9 Enabled Up LECS 19
10 V1/V1 j10 Enabled Up LECS 20
This example shows the configuration for LEC 1.
ATM(configure)# show lec 1
ATM LEC 1 Configuration:
=========================
Name : default
Admin Status : Disabled
Oper Status : Down
Configured Version : V2
Operational Version : -
Name Definition
lecID Optional, the LEC identifier. The range of
values is: Minimum = 1, Maximum = 128.
If omitted, all LECs with summarized info will
be displayed.