Acer s10 User Manual
Page 86
W o r k i n g w i t h y o u r b a s i c a p p l i c a t i o n s
Using Date Book
68
• If the event is 1-hour long, skip to the end of this procedure.
• If the event is longer or shorter than an hour, tap directly on the time to open
the Set Time dialog box. Proceed to step 4.
TIP:
You can open the Set Time dialog box (to select a start time) by making sure no event is
selected, and then writing a number on the number side of the Graffiti writing area.
4
Set the duration of the event in either of the following ways:
• Tap the time columns in the Set Time dialog box to set the Start Time; then,
tap on the End Time time columns to set the End Time.
• Tap All Day if the event lasts all day. The default hours of a standard business
day are set by the user, and may be changed using the Preferences command
in the Date Book application. See the section "Changing the displayed Start
and End Times" on page 79.
5
Tap OK.
Tap the time
to display the
Set Time
dialog box.
Start Time
highlighted
Tap to scroll to
earlier hours.
Tap to scroll to
later hours.
Tap to change
hours.
Tap to change
minutes.