Creating a login script – Acer s10 User Manual
Page 305
1 2 S e t t i n g p r e f e r e n c e s f o r y o u r A c e r s 1 0
Network preferences
287
• If your IP address is permanently assigned:
– Tap the IP Address check box to deselect it.
– In the permanent IP address field, tap the space to the left of the first
period, and enter the first section of the IP address using a number only,
from 0 to 255.
3
Enter the second, third, and last sections of the IP Address field by repeating the
procedures above.
4
Tap OK.
Creating a login script
A login script is a series of commands that automates logging into a network server,
for example, your office LAN or your ISP. A login script is asociated with a specific
service template created in Network Preferences.
You can create login script files in two ways:
• Ina text editor on your computer, in which you create a file with an extension
pnc. You can then install this file in your Acer s10 using the Install Tool.
• In the Login Script dialog box, accessed from the Details dialog box in
Network Preferences.
NOTE:
Some commands, such as Send, require additional information and have a parameter
field to add the necessary data.
To create a login script on your Acer s10:
1
With a service template selected in the Network Preferences screen, tap Details.
2
In the Details dialog box, tap Script.
3
In the Login Script screen, tap the End pick list.