Acer s10 - Manual (Page 296)

1 2 S e t t i n g p r e f e r e n c e s f o r y o u r A c e r s 1 0
General preferences
278
General preferences
The General Preferences screen enables you to set the Auto shut-off interval;the Stay
on in Cradle feature, sounds and volume, and the Beam Receive feature.
Setting the Auto-off interval time
You can set when your Acer s10 automatically shuts off. Your Acer s10 automatically
turns off the power and backlight after a period of inactivity, to conserve battery
power. If you find that your Acer s10 shuts itself off before you finish reviewing the
information on the screen, you can increase the automatic shutoff setting.
To set the Auto-off interval time:
1 Tap the Auto-off after pick list.
2 Tap an option — 30 seconds, 1 minute, 2 minutes, or 3 minutes.
Setting your Acer s10 to stay on while in the cradle
You can choose to leave your Acer s10 on when it is in the cradle during a HotSync
operation, or when you are recharging your battery, so you can continue viewing your
data.
To set your device to stay on while in the cradle:
• Tap the Stay on in Cradle check box to allow your Acer s10 to stay on while in
the cradle.
Unchecking the box will cause your Acer s10 to shut off after the Auto
shutoff time interval that you set.
Setting the sounds and volumes
Your Acer s10 uses a variety of sounds. You can control the sound and volume for
system alerts, alarms, and games using the General Preferences screen.