Uploading html files – Extron Electronics HDXP Plus Series User Guide User Manual
Page 89
HDXP Plus Series Switchers • Matrix Software
83
Uploading HTML Files
You can create customized HTML pages for the HDXP to display. The HTML Files List
window (shown below) provides a way to view the contents of the HDXP file system and
to upload custom HTML pages to the switcher.
Figure 82.
HTML Files List Window
Upload HTML pages as follows:
NOTES:
•
The files listed in figure 82 are shown for example only and may not be present on
your switcher.
•
The HTML Files List window is for inserting your own HTML pages. This is
not
the window to replace the firmware that controls all switcher operation (see
on page 81 to replace the firmware).
•
The following characters are invalid in file names:
+ ~ , @ = ` [] {} < > ' " ; : | \ ?
and {space}.
1.
Connect the PC to the HDXP via the RS232/RS422 port or Ethernet port.
2.
Start the Matrix Switcher Control Program and connect to the HDXP switcher (see
steps 1 through 4
on page 70 for the procedure).
3.
From the
Tools
menu, select
HTML
File
Manager
. The HTML Files List window
opens.
4.
Click the
Pick
Files
to
Load
to
Server
button. The Select files window opens.
5.
Navigate to the folder where you saved the HTML files. Select the files.
NOTES:
•
To select multiple files, hold the
•
If you want one of the HTML files that you created to be the default start-up
page, name the file “index.html”. The HDXP switcher looks for that file name
when you first connect to it using an Internet browser.
6.
Click the
Open
button. The file uploading process may take a few minutes.
7.
Click the
Update
button to confirm the upload.
8.
Click the
Close
button to exit the HTML Files List window.