Extron Electronics HDXP Plus Series User Guide - Manual (Page 112)

HDXP Plus Series Switchers • HTML Configuration and Control 106
6. Navigate to the folder where you saved the firmware upgrade file. Select the file.
Figure 103. Open Window with an HDXP Firmware File Selected
NOTES:
• Valid firmware files must have the file extension .S19. A file with any other
extension is not a firmware upgrade.
• The original factory-installed firmware is permanently available on the HDXP
switcher. If the attempted firmware upload fails for any reason, the HDXP
reverts to the factory-installed firmware.
7. Click Open .
8. On the Firmware Upgrade page, click the Upload button.
While the firmware is uploading, the Upload button changes to Uploading... .
When the uploading process is complete, the button changes back to Upload . The
uploading may take a few minutes.
When the firmware upload is complete, the new version number is displayed on the
Firmware Upgrade and System Status screens.