Extron Electronics HDXP Plus Series User Guide - Manual (Page 25)

HDXP Plus Series Switchers • Operation 19
3. Press and release the Input 5 button.
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
Press and release the Input 5 button.
The button lights
green.
INPUTS
Figure 14. Selecting Input 5
4. Press and release the Output 3, Output 4, and Output 8 buttons.
CONTROL 1 2 3 4 5 6 7 8
PRESET ENTER
= Blinking Button
ESC VIEW
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink green to indicate that the selected input will be
tied to these outputs.
The Enter button blinks
green to indicate the need to
confirm the change.
OUTPUT
Figure 15. Selecting the Outputs
NOTE: The entire set of ties can be canceled at this point by pressing and
releasing the Esc > button. The Esc > button flashes red once.
5. Press and release the Enter button.
ENTER
All input and output buttons
become unlit or return to
background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button
becomes unlit or returns to
background illumination.
Figure 16. Confirming the Tie
The configuration now is:
Input 5 tied to output 3, output 4, and output 8
Input 5 Tied to
Outputs 3, 4, and 8
Input
Output
3
4
8
5
Figure 17. Example 1, Final Configuration