Saving and recalling presets, Eset (see, Viewing i/o groups – Extron Electronics HDXP Plus Series User Guide User Manual
Page 35: Group 3, and esc, Hdxp plus series switchers • operation 29
HDXP Plus Series Switchers • Operation
29
Viewing I/O groups
To see the groupings that have been created:
1.
Press and hold the Input 1 and Output 1 buttons until all ungrouped buttons light
green (approximately 3 seconds).
2.
Press the Control button for the group number you want to view (Enter = group 1,
Preset = group 2, View
<
= group 3, and Esc
>
= group 4). The buttons for all inputs
and outputs in that group light green.
3.
To view another group, repeat step 2.
4.
When finished viewing groups, wait 30 seconds for grouping mode to time out, or
press the Matrix and Preview buttons simultaneously.
Saving and Recalling Presets
The current configuration (configuration 0) can be saved as a preset in any one of 32
preset memory addresses. Preset locations are assigned to the input buttons and (where
necessary) output buttons. Up to 32 presets can be selected from the front panel to be
either saved or recalled. When a
preset is recalled from memory via the front panel, it
becomes the
current configuration.
NOTES:
•
Presets cannot be viewed from the front panel unless recalled as the current
configuration. Presets that are not the current configuration
can be viewed using
the Matrix Switcher Control Program (see the
on page 67 for more details).
The current configuration and all other presets are stored in non-volatile memory.
When power is removed and restored, the current configuration remains active
and all presets are retained.
•
When a preset is recalled, it replaces the current configuration, which is lost
unless it is also stored as a preset. The recalled preset overwrites all of the
current configuration ties in favor of its own ties.
•
Figure 42 shows the presets associated with the input and output buttons on
each HDXP model. (On the HDXP 1616, which has only 16 input connectors,
input buttons 17 through 32 are used for presets, but not for input selection.)
1
HDXP 3216 and HDXP 1616
Preset
1
Preset
5
Preset
6
Preset
10
Preset
7
Preset
13
Preset
14
Preset
15
Preset
2
Preset
8
Preset
9
Preset
3
Preset
4
Preset
11
Preset
12
Preset
16
Preset
17
Preset
21
Preset
22
Preset
26
Preset
23
Preset
29
Preset
30
Preset
31
Preset
18
Preset
24
Preset
25
Preset
19
Preset
20
Preset
27
Preset
28
Preset
32
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
INPUTS
I
N
P
U
T
S
1
HDXP 3232
Preset
1
Preset
5
Preset
6
Preset
10
Preset
7
Preset
13
Preset
14
Preset
15
Preset
2
Preset
8
Preset
9
Preset
3
Preset
4
Preset
11
Preset
12
Preset
16
Preset
17
Preset
21
Preset
22
Preset
26
Preset
23
Preset
29
Preset
30
Preset
31
Preset
18
Preset
24
Preset
25
Preset
19
Preset
20
Preset
27
Preset
28
Preset
32
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Figure 42.
Preset Locations on the HDXP 3232, 3216, and 1616