Extron Electronics HDXP Plus Series User Guide - Manual (Page 79)

HDXP Plus Series Switchers • Matrix Software 73
Setting up the Matrix window
On the Matrix window, the inputs and outputs are represented by boxes. You can make
the control program easier to use by assigning device icons that represent your connected
devices to each input and output box.
1. Click on an input or an output box. The Input Devices or Output Devices window
opens, containing icons representing devices that can be connected to a switcher.
Figure 75. Input Devices and Output Devices Icon Windows
2. Click and drag an icon from the devices screen to an input or output box on the
Matrix window. Repeat for additional devices as desired.
3. In the Caption field, enter a caption for the device, if desired; for example, Laptop .
This caption appears in the descriptive window that pops up when you pass the
cursor over an input or output box containing an icon.
Figure 76. Pop-up Window for Input 1 Containing a Caption
4. When finished assigning icons, click OK to close the device window.
To change an icon in an input or output box, drag the new icon to the box. It
replaces the previous one.
To remove the icon from a box and leave the box empty, drag an empty square
to the box.
Alternatively, you can display the input and output numbers in the boxes instead of
icons. To do this, select
Numbers in I/O Boxes from the Preferences drop-down
menu.