Extron Electronics HDXP Plus Series User Guide - Manual (Page 60)

HDXP Plus Series Switchers • Remote Configuration and Control 54
Command and Response Table for SIS Commands
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Create Ties
NOTES: • Commands can be entered back-to-back in a string, with no spaces between commands.
Example: 1*1!02*02&003*003%4*8&
• The Quick multiple tie and Tie input to all outputs commands activate all I/O switches simultaneously.
• The HDXP switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
• The & tie command for RGB, the % command for video, and the ! command for all types of ties can be
used interchangeably.
• To untie an output from all inputs, enter a tie command in which X@ (the input ) = 0.
Tie an input to an output X@ * X# !
X@ * X# &
X@ * X# %
Out X#
• In X@
• All ]
Out X# • In X@ • RGB ]
Out X#
• In X@
• Vid ]
Tie input X@ to output X# .
! = all signal types
& = RGB
% = composite or S-video
(See the second bullet point in
the notes above.)
Example: 1*3! Out3 • In1 • All ] Tie input 1 to output 3 (any
type).
Quick multiple tie E + Q X@ * X# %... X@ * X# ! }
Qik ] Tie multiple inputs ( X@ ) to
multiple outputs ( X# ) with a
single command.
Example: E + Q3 * 4 % 3 * 5 % 3*6! }
Qik ] Tie input 3 video to output 4,
tie input 3 video to output 5,
and tie input 3 to output 6.
Tie an input to all outputs X@ *!
X@ * &
X@ * %
In X@ • All ]
In X@
• RGB ]
In X@
• Vid ]
Tie input X@ to all outputs.
! = all signal types
& = RGB
% = composite or S-video
(See the second bullet point in
the notes above.)
Example: 5 * & In5 • RGB ] Tie input 5 RGB to all outputs.
Mute Commands
Video mute
X# * 1B Vmt X# *1 ] Mute output X# video (video
off).
Video unmute X# * 0B Vmt X# * 0 ] Unmute output X# video
(video on).
View individual mute status X# B X1$ ] View mute status X1$ for video
output X# .
NOTE: X@ = Input number (for ties) 0 – maximum number of inputs for your model (0 = untied)
X# = Output number 1 – maximum number of outputs for your model
X1$ = Mute status for individual output 0 = unmuted, 1 = muted