Extron Electronics HDXP Plus Series User Guide - Manual (Page 116)

HDXP Plus Series Switchers • HTML Configuration and Control 110
Output Settings Page
The Output Settings page allows you to mute or unmute and to change the reclocker rate
of the outputs on your unit.
Figure 106. Output Settings Page
Muting and unmuting the output
To mute or unmute an output, do the following:
1. To select an individual output to mute or unmute, select an output number from the
Output drop-down menu.
2. Select or clear the Mute/Un-Mute check box. The word Muted appears in red next to
the output selection menu.
Changing the output reclocker rate
To change the output reclocker rate, do the following:
1. Select the desired output from the drop-down menu.
2. From the Reclocker Rate drop-down menu, select the desired rate.
• Select Automatic if you want the reclocker to automatically adapt the output to
the input signal.
• To disable the reclocker for the selected output, select Bypass .
To mute, unmute, or change the reclocker rate of all the outputs, select or clear the ALL
check box.