Configuration worksheets, Worksheet example 1: system equipment, Worksheet example 1: system – Extron Electronics HDXP Plus Series User Guide User Manual
Page 47: Equipment, Hdxp plus series switchers • operation 41
HDXP Plus Series Switchers • Operation
41
Configuration Worksheets
Rather than trying to remember the configuration for each preset, use worksheets to
record this information. Make copies of the blank worksheet at the end of this section,
and use one for each preset configuration. Cross out all unused or inactive inputs and
outputs. The worksheet is generic for all models of HDXP. Disregard or cross out boxes
for inputs and outputs that your switcher does not have.
Worksheet Example 1: System Equipment
Figure 64 shows a worksheet for an HDXP in a fictional organization with the system
hardware annotated. Inputs 10, 11, and 13 – 16 have no connection in this organization,
so they have been crossed out on the worksheet.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
Preset #
Title:
Video ties:
Fill in the preset number and use colors, or dashes, etc. to make connecting lines.
VTR
#3
VTR
#2
VTR
#1
Weekly status mtg
3
SDI/
HD-SDI
Camera
#2
SDI/
HD-SDI
Camera #1
Main
podium
Main hall
#1
Main hall
#2
Podium
monitor
#1
Conf.
Room
Podium
monitor
#2
Demo
Room
Lobby
monitor
Editing
Station
#1
VTG 400
1
Input sources
Output destinations
SDI/
HD-SDI
Camera
#3
Editing
Station
#2
Editing
Station
#3
13
14
15
16
9
10
11
12
13
14
15
16
Figure 64.
Worksheet Example 1: System Equipment
Inputs include VTRs, editing stations, SDI/HD-SDI cameras, and an Extron VTG 400.
Output devices include various SDI/HD-SDI monitors.
The VTG 400 video test generator connected to input 12 enables a video test pattern
to be sent to one, several, or all output devices for problem isolation or adjustment
purposes.