Extron Electronics HDXP Plus Series User Guide User Manual
Page 111
HDXP Plus Series Switchers • HTML Configuration and Control
105
Firmware Upgrade Page
The Firmware Upgrade page provides a way to replace the firmware that is coded on
the HDXP control board without needing to take the switcher out of service. Access the
Firmware Upgrade page by clicking the
Firmware
Upgrade link on the System Settings
page.
Figure 102.
Firmware Upgrade Page
NOTE: The Firmware Upgrade page is only for replacing the firmware that controls
all switcher operation. To insert your own HTML pages, see
Update the HDXP firmware as follows:
1.
Go to the Extron website,
e file to
your computer.
a.
On the Extron web page, select the
Download
tab.
b.
On the Download Center page, click the
Firmware
link on the left sidebar menu.
c.
Scroll to locate the name of your HDXP switcher and click its
Download
link.
d.
On the next screen, fill in the required information, then click the
Download
product
name_firmware
version.exe
button.
e.
On the File Download - Security Warning window, click
Save
.
f.
On the Save As window, browse to the folder where you want to save the
firmware file, and click
Save
. The firmware installation file is placed on your hard
drive.
2.
Access the HDXP web pages.
3.
Select the
Configuration
tab.
4.
On the Configuration page, click the
Firmware
Upgrade
link on the left sidebar menu.
5.
Click the
Choose
File
button. An Open window is displayed.