EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 95)

Issue 5.6.A IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - 2009
86
R
EPLACING
T
IMELINE
E
LEMENTS
F
ROM
N
OWLINE TO
OUT
P
OINTS
Schema
The following schema shows how the Match Frame Replace is performed when
timeline elements are replaced from the nowline to the OUT point:
Procedure
To replace one or more timeline element(s) of the same source clip from the
nowline to the OUT point using the Match Frame Replace function, proceed as
follows:
1. In the Player and Timeline panes, select the tracks to be taken into account
when you will insert the media. See also the section ‘Track Selection
Applied to the Timeline Element’, on page 80.
2. In the Player panel, load the clip or train that contains the material to be
inserted into the timeline.
3. Click in the jog bar to define the reference position in the loaded media.
4. In the loaded timeline, place the nowline on the element(s) to be replaced
from the nowline to the OUT point.
6. Do one of the following to execute the Match Frame Replace:
• In the Player, click in the Player and press
simultaneously.
• On the keyboard, press + .