EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 149)

Issue 5.6.A IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - 2009
140
When you first access the window in a session, the default value defined in the
Timeline settings is displayed. Then, the last value used is restored each time you
open the window.
Field Description
The following table provides a short description of the fields:
Field Description
Type Effect type that will be applied to the selected transitions.
The possible values are:
• Cut
• Mix
• Wipe
If you select ‘wipe’, you need to select the kind of wipe you
want to perform in the drop-down list:
• Wipe L Î R: wipe from left to right
• Wipe R Î L: wipe from right to left
• Wipe U Î D: wipe from top to bottom
• Wipe D Î U: wipe from bottom to top.
When the ‘wipe’ effect is defined, it is applied to the video track
and a ‘mix’ is automatically defined on the selected audio
tracks.
Duration Duration of the effect that will be applied to the selected
transitions. The duration is defined in frames must fulfil the
following conditions:
• Even number
• Minimum of 2 frames
• Maximum recalculated based on the transition selection
Position Position of the effect in relation to the transition.
The possible values are:
• Before cut: before the transition
• Centered: centered on the transition
• After cut: after the transition