EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 184)

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
175
After
4.14.10 R
ESETTING THE
V
OLUME
H
OW TO
R
ESET THE
V
OLUME ON AN
T
RACK
To reset the volume on the whole track loaded, proceed as follows:
• In the Volume Automation panel, right-click and select Reset track automation
volume.
The volume of the whole track is reset to its initial volume.
H
OW TO
R
ESET THE
V
OLUME ON A
P
ART OF A
T
RACK
To reset the volume on a part of the track loaded, proceed as follows:
1. In the Volume Automation panel, delimit the part of the track on which you
want to reset the volume as follows:
a. Add a mark IN point at the position to start the volume reset.
b. Add a mark OUT point at the position to stop the volume reset.
2. Right-click and select Reset automation volume.
The volume of the selected part of the track is reset to its initial volume.
H
OW TO
R
ESET THE
V
OLUME ON AN
A
UDIO
E
LEMENT
To reset the volume on an element of the loaded track, proceed as follows:
1. In the Volume Automation panel, position the mouse cursor on the element
for which you want to reset the volume.
2. Right-click and select Reset clip automation volume.
The volume of the audio element on the loaded track is reset to its initial volume.