EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual User Manual
Page 126
IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
117
H
OW TO
T
RIM AN
E
LEMENT
U
SING THE
K
EYBOARD
S
HORTCUTS
To trim an element using the keyboard shortcuts, proceed as follows
1.
Select the Insert
of Overwrite
mode to be applied in the trim
action by clicking the Insert/Overwrite Global mode icon.
2.
If the trim mode is not active, do the following:
a) Position the nowline next to the transition on which to activate the trim
mode.
b) Select the Track Selection buttons of the tracks to be taken into account
in the trim action.
c) Press U on the keyboard.
3.
If required, change the trim mode using the following keyboard shortcuts:
•
to activate the Trim Left mode
•
to activate the Trim Right mode
•
to activate the Trim Left and Right mode (roll mode) again.
4.
Use the following keyboard shortcuts to perform the trim action:
•
to move the IN or OUT point 10 frames on the left.
•
to move the IN or OUT point 1 frame on the left.
•
to move the IN or OUT point 1 frame on the right.
•
to move the IN or OUT point 10 frames on the right.
The selected tracks of the element are trimmed according to the active trim mode
up to the requested position.
Note
If the limits of the A/V material are reached, the trim actions are no
longer taken into account.