EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 170)

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
161
4.13.8 A
DDING
A
UDIO
S
WAPS
H
OW TO
A
DD A
S
WAP OR
M
UTE TO ONE OR
M
ORE
E
LEMENTS
OF AN
A
UDIO
T
RACK
To add an audio swap to one or more elements of an audio track, proceed as
follows:
1. In the general timeline display, select the elements of a track on which you
want to define a swap. For a multiple selection, select the elements while
pressing CTRL.
2. Right-click one of the selected elements and select Add Swap/Mute.
The Swap/Mute Configuration window opens:
3. Do one of the following to define a swap or mute:
• For a swap, click in the matrix at the intersection between the source
channel to play and the output channel on which the source should be
played.
• For a mute, click in the matrix on the bullet located on the line of the
output channel to mute.
4. Repeat the step 3 on all the channels that you want to swap or mute.
5. Click Apply.
The swap and mutes are defined on the requested elements of the audio track.
This is symbolized with the global swap icon or the mute icon displayed
on the element in the general display of the timeline.
The swaps and mutes can be viewed on the Swap/Mute Zoom display: