EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 164)

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
155
4.13.5 M
ANUAL
S
WAP
D
EFINITION IN THE
G
ENERAL
D
ISPLAY
M
ODE
D
ESCRIPTION
You can swap one or more channels of one or more elements selected on an audio
track when you are in the general timeline display. In this case, the swap is
applied to the swapped channels from the IN point to the OUT point of the
selected elements.
You can define such a swap in the Swap/Mute Configuration window accessible
when right-clicking a given audio track of the selected elements and selecting Add
Swap/Mute.
E
XAMPLE
Initial Situation
The timeline audio configuration is 4 tracks of 2 channels. You want to play the
channels a3 and a4 (G2 track) of the source media onto the output channels a1
and a2 respectively (G1 track) of one timeline element.
Manual Swap Action
You will perform the swap action on the G1 track of the timeline element, where
you specify which source channels will be played on the channels of the G1 track.
In this case, you will map:
• the source channel a3 to the output channel a1 and
• the source channel a4 to the output channel a2.