EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 174)

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
165
4. Do one of the following to modify or add a swap or mute:
• For a swap, click in the matrix at the intersection between the source
channel to play and the output channel on which the source should be
played.
• For mute, click in the matrix on the bullet located on the line of the output
channel to mute. If you click again, the bullet reappears and the channel is
no longer muted.
5. If you want to define a mix effect at the start and end of the swap, specify the
duration of the effect in the Swap mix duration spin box.
6. Click Apply.
The swap and mutes are modified according to the new settings.
4.13.10 D
ELETING
A
UDIO
S
WAPS
H
OW TO
D
ELETE A
S
WAP OR
M
UTE ON ONE OR
M
ORE
E
LEMENTS OF AN
A
UDIO
T
RACK
To delete a swap or mute defined on one or more elements of an audio track,
proceed as follows:
1. In the general timeline display, select the elements of a track on which you
want to delete the swap. For a multiple selection, select the elements while
pressing CTRL.
2. Right-click one of the selected elements and select Delete Swap/Mute.
3. Answer ‘Yes’ to the message asking whether you want to delete the swaps or
mutes.
The selected swaps or mutes are deleted.