EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 175)

Issue 5.6.A IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - 2009
166
H
OW TO
D
ELETE A
S
WAP OR
M
UTE
D
EFINED
F
ROM AND TO
G
IVEN
P
OINTS OF A
T
RACK
To modify an audio swap or mute defined on a part of an audio track, proceed as
follows:
1.
In the general timeline display, click the Swap/Mute Zoom icon on the
right of the track on which to add the swap or mute.
The track is displayed in Swap/Mute Zoom mode.
2. Select the swaps you want to delete in one of the following ways:
• Lasso the swap point(s) to select from right to left.
• Right-click the swap point(s) to select, keeping CTRL pressed for multiple
selections.
3. Right-click and select Delete Swap/Mute.
The Swap/Mute Configuration window opens.
4. Answer ‘Yes’ to the message asking whether you want to delete the swaps or
mutes.
The selected swaps or mutes are deleted.