EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 196)

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
187
• Press +
• Press the Replace key on the ShuttlePRO:
6. The nowline is automatically positioned on the mark IN point. If a pre-roll is
defined, the nowline is positioned on the mark IN minus the pre-roll
duration.
As the Replace process takes place, the nowline moves to the right and the
area already replaced is displayed on an orange background:
7. The Replace process is stopped in one of the following ways:
• Automatically: you have defined a mark OUT and the process will be
stopped when it reaches the mark OUT.
• Manually: press again the Replace button to stop the Replace process.
• End of timeline: If the Replace process is not stopped automatically or
manually, it will be stopped when the process reaches the end of the
timeline.
Two seconds after the end of the Replace process, the replaced part of the A/V
material is available in the timeline and you can read it.
4.15.5 H
OW
T
O
C
ANCEL A
R
EPLACE
You can cancel the Replace process by doing the following:
• If the Replace operation is in progress, click the ESC key to cancel it.
• If the Replace operation is completed, click the Undo button.
To restore the Replace, you can click the Redo button.