EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 94)

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
85
Available Material
The general principles about available material remain valid for the Match Frame
Replace function. See also the section ‘General Principles’, on page 73.
R
EPLACING
T
IMELINE
E
LEMENTS
F
ROM
IN
TO
OUT P
OINTS
Schema
The following schema shows how the Match Frame Replace is performed when
timeline elements are replaced from their IN to OUT points:
Procedure
To replace one or more timeline element(s) of the same source clip using the
Match Frame Replace function, proceed as follows:
1. In the Player and Timeline panes, select the tracks to be taken into account
when you will insert the media. See also the section ‘Track Selection
Applied to the Timeline Element’, on page 80.
2. In the Player panel, load the clip or train that contains the material to be
inserted into the timeline.
3. Click in the jog bar to define the reference position in the loaded media.
4. In the loaded timeline, place the nowline on the element(s) to be replaced.
6. Do one of the following to execute the Match Frame Replace:
• In the Player, click the Match Frame Replace icon
• On the keyboard, press