EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 41)

Issue 5.6.A IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - 2009
32
H
OW
?
To adjust the audio level output to the headphones, proceed as follows:
• Move the slider up or down on the scale to specify how many dBs you want to
add to or remove from the initial audio level of the media to be played.
The audio level gain or reduction is displayed in the field in the middle of the Input
Gain range.
3.8.4 A
SSIGNING THE
A
UDIO
C
HANNELS TO THE
L
OUDSPEAKERS
OF THE
H
EADPHONES
W
HERE
?
You can select the audio channels you want to assign to the right and left
loudspeaker of the headphones in the Audio Channels area of the AVH Config.
window.
H
OW
?
To assign the audio channels to the loudspeakers, proceed as follows:
1. Left-click the white bar next to the channel you want to associate to the left
ear.
2. Right-click the white bar next to the channel you want to associate to the
right ear.
3.8.5 S
AVING THE
A
UDIO
M
ONITORING
P
ARAMETERS IN A
T
EMPLATE
W
HERE
?
In the Template area, you can save the values assigned to the Input Gain and
Audio Channels parameters in a template, and reload them later on when
necessary.
H
OW TO
C
REATE A
T
EMPLATE
To create a template of the audio monitoring parameters, proceed as follows: