EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 75)

Issue 5.6.A IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - 2009
66
The table contains the following fields:
Field Description Mandatory ?
Name Name of the timeline in maximum 32 characters.
The field is filled with the original timeline name
followed by the word ‘COPY’.
Yes
LSM ID ID identifying the timeline position in the XNet
network.
• If you enter an LSM ID that is already used, the
copy will not be created and an error message
will be displayed in the Message Pane.
• If you do not enter an LSM ID, IPDirector will
assign one LSM ID to the timeline.
No
Destination
XT List of all servers on the XNet network to which
the timeline can be copied. Yes
Send to Bins where a shortcut to the timeline copy can be
stored. No
Copy Type Allows you to select how the copy should be
performed:
• EDL Only: this copies only the timeline
definition to the IPDirector database and to the
server.
• EDL and clips “short”: this copies the timeline
definition and the clips from their Short IN to
the Short OUT as defined in the timeline. This
is the default value.
• EDL and clips “long”: this copies the timeline
definition and the clips from their Protect IN to
the Protect OUT and available in the timeline.
No
H
OW TO
C
OPY A
T
IMELINE
To create a copy of a timeline, proceed as follows:
1. In the Timeline pane, right-click the Timeline Name field and select Create
a copy. The Copy Timeline window opens.
2. If requested, modify the default name and type the requested LSM ID.
2. Select the server to which you want to copy the timeline in the Server list
box.
3. In the Copy Type group box, tick the radio button corresponding to the type
of copy you want to perform.
4. If requested, check a bin to which you want to send a shortcut of the
timeline copy.