6 time code and duration fields, Mark in tc, Mark out tc – EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual User Manual
Page 62: Duration between mark in and mark out, Nowline tc
IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
53
4.1.6 T
IME
C
ODE AND
D
URATION
F
IELDS
The time code fields displayed in the Timeline pane are shortly described below:
M
ARK
IN
TC
The Mark IN TC field displays the time code of the mark IN position on the
timeline, if any mark IN point is defined.
If you want to position the mark IN point on a given TC of the timeline, type this
time code in the Mark IN TC field, press ENTER: the mark IN position will be
moved to the TC entered.
M
ARK
OUT
TC
The Mark OUT TC field displays the time code of the mark OUT position on the
timeline, if any mark OUT point is defined.
If you want to position the mark OUT point on a given TC of the timeline, type this
time code in the Mark OUT TC field, press ENTER: the mark OUT position will be
moved to the TC entered.
D
URATION BETWEEN
M
ARK
IN
AND
M
ARK
OUT
The middle field displays the duration between the mark IN and mark OUT points
defined on the timeline. It is not editable.
N
OWLINE
TC
The Nowline TC field displays the time code of the nowline position on the
timeline.
If you want to position the nowline to a given TC of the timeline, type this time
code in the Nowline TC field, press ENTER: the nowline position will be moved to
the TC entered.