EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 201)

Issue 5.6.A IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - 2009
192
H
OW TO
M
ODIFY A
C
LIP
GPI
To modify a GPI defined on an element of the timeline, proceed as follows:
1. Select the Clip GPI with the lasso by left-clicking the mouse in the Lasso
Selection area and dragging it from left to right to cover the clip GPI
marker.
The GPI colour will turn blue:
2. Right-click on the GPI and select Modify GPI from the contextual menu.
The Modify GPI OUT dialog box opens.
3. Modify the requested settings in the Modify GPI Out window.
4. Click Apply.
The settings of the clip GPI have been modified. The new GPI settings will display
after one second when you position the mouse cursor on the GPI marker.
H
OW TO
D
ELETE A
C
LIP
GPI
1. Select the Clip GPI with the lasso by left-clicking the mouse in the Lasso
Selection area and dragging it from left to right over the clip GPI.
The GPI colour will turn blue:
2. Right-click on the GPI and select Delete GPI from the contextual menu.
The following warning message is displayed:
3. Click Yes to confirm that you want to delete the clip GPI.
The clip GPI marker has been removed from the Timecode bar.