SMC Networks TigerAccess SMC7816M - Manual (Page 878)

M
ULTICAST
F
ILTERING
C
OMMANDS
35-2
IGMP Snooping Commands
This section describes commands used to configure IGMP snooping on
the switch.
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form
to disable it.
Syntax
[no] ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Table 35-2 IGMP Snooping Commands
Command Function Mode Page
ip igmp snooping Enables IGMP snooping GC 35-2
ip igmp snooping vlan
static Adds an interface as a member of a
multicast group GC 35-3
ip igmp snooping
version Configures the IGMP version for
snooping GC 35-4
ip igmp snooping
immediate-leave Immediately deletes a member port of a
multicast service if a leave packet is
received at that port and
immediate-leave is enabled for the
parent VLAN IC 35-5
show ip igmp snooping Shows the IGMP snooping and query
configuration
PE 35-6
show
mac-address-table
multicast Shows the IGMP snooping MAC
multicast list PE 35-6