SMC Networks TigerAccess SMC7816M - Manual (Page 79)

N
AVIGATING THE
W
EB
B
ROWSER
I
NTERFACE
3-11
Static Membership by
Port
Configures membership type for interfaces, including
tagged, untagged or forbidden 13-14
Port Configuration Specifies default PVID and VLAN attributes 13-15
Trunk Configuration Specifies default trunk VID and VLAN attributes 13-15
Private VLAN 13-18
Status Enables or disables the private VLAN 13-18
Link Status Configures the private VLAN 13-19
Protocol VLAN 13-20
Configuration Creates a protocol group, specifying the supported
protocols 13-21
Port Configuration Maps a protocol group to a VLAN 13-22
802.1Q Tunneling Sets the Tag Protocol Identifier (TPID) and copying
of the priority bits from inner to outer VLAN tag 13-24
VLAN Swap Manually maps VLAN IDs between uplink and
downlink ports for use in QinQ tunneling 13-33
Priority 14-1
Default Port Priority Sets the default priority for each port 14-1
Default Trunk Priority Sets the default priority for each trunk 14-1
Traffic Classes Maps IEEE 802.1p priority tags to output queues 14-3
Traffic Classes Status Enables/disables traffic class priorities (not
implemented) NA
Queue Mode Sets queue mode to strict priority or Weighted
Round-Robin 14-6
Queue Scheduling Configures Weighted Round Robin queueing 14-7
IP Precedence/
DSCP Priority Status
Globally selects IP Precedence or DSCP Priority, or
disables both. 14-9
IP Precedence Priority Sets IP Type of Service priority, mapping the
precedence tag to a class-of-service value 14-11
IP DSCP Priority Sets IP Differentiated Services Code Point priority,
mapping a DSCP tag to a class-of-service value 14-13
Table 3-2 Switch Main Menu (Continued)
Menu Description Page