Show lre rate-adaption, Show lre rate-adaption -75, Show lre rate-adaption (29-75) – SMC Networks TigerAccess SMC7816M User Manual
Page 757: Vdsl i, 75 show lre rate-adaption
D
ISPLAYING
VDSL I
NFORMATION
29-75
show lre rate-adaption
This command shows if line rate adaptation which sets the optimal
transmission rate based on existing line conditions is enabled or disabled.
Syntax
show lre rate-adaption [unit/port]
• unit - Stack unit. (Range: 1)
• port - Port number. (Range: 1-16)
Command Mode
Privileged Exec
Command Usage
• Use this command without the interface parameter to show if rate
adaptation has been enabled for all VDSL ports on the switch, or with
an interface to display this information for a specific port.
• The data rate on a VDSL line can be affected by factors such as
temperature, humidity, and electro-magnetic radiation. When rate
adaption is enabled, the switch will determine the optimal transmission
rate for the current conditions.
Example
This example shows the default setting for rate adaption.
Related Commands
Console#show lre rate-adaption 1/1
Rate Adaption : Adaptive
Console#