SMC Networks TigerAccess SMC7816M - Manual (Page 574)

U
SER
A
UTHENTICATION
C
OMMANDS
22-34
802.1X Port Authentication
The switch supports IEEE 802.1X (dot1x) port-based access control that
prevents unauthorized access to the network by requiring users to first
submit credentials for authentication. Client authentication is controlled
centrally by a RADIUS server using EAP (Extensible Authentication
Protocol).
Table 22-12 802.1X Port Authentication Commands
Command Function Mode Page
dot1x
system-auth-control Enables dot1x globally on the switch. GC 22-35
dot1x default Resets all dot1x parameters to their
default values GC 22-35
dot1x max-req Sets the maximum number of times
that the switch retransmits an EAP
request/identity packet to the client
before it times out the authentication
session IC 22-36
dot1x port-control Sets dot1x mode for a port interface IC 22-36
dot1x operation-mode Allows single or multiple hosts on an
dot1x port IC 22-37
dot1x re-authenticate Forces re-authentication on specific
ports PE 22-38
dot1x re-authentication Enables re-authentication for all ports IC 22-39
dot1x timeout
quiet-period Sets the time that a switch port waits
after the Max Request Count has been
exceeded before attempting to acquire
a new client IC 22-39
dot1x timeout
re-authperiod Sets the time period after which a
connected client must be
re-authenticated IC 22-40