Chapter 37 dhcp commands, Dhcp client, Ip dhcp restart client – SMC Networks TigerAccess SMC7816M User Manual
Page 919: 37 dhcp commands -1, Dhcp client -1, Ip dhcp restart client -1, Dhcp commands, 37 dhcp c, Hapter, Ommands
37-1
C
HAPTER
37
DHCP C
OMMANDS
These commands are used to configure Dynamic Host Configuration
Protocol (DHCP) client and relay functions. You can configure any VLAN
interface to be automatically assigned an IP address via DHCP. This switch
can also be configured to relay DHCP client configuration requests to a
DHCP server on another network.
DHCP Client
ip dhcp restart client
This command submits a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Table 37-1 DHCP Commands
Command Group Function
Page
DHCP Client
Allows interfaces to dynamically acquire IP address
information
DHCP Relay
Relays DHCP requests from local hosts to a remote
DHCP server
Table 37-2 DHCP Client Commands
Command
Function
Mode Page
ip dhcp restart
Submits a BOOTP or DHCP client request PE