SMC Networks TigerAccess SMC7816M - Manual (Page 575)

802.1X P
ORT
A
UTHENTICATION
22-35
dot1x system-auth-control
This command enables IEEE 802.1X port authentication globally on the
switch. Use the no form to restore the default.
Syntax
[no] dot1x system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Example
dot1x default
This command sets all configurable dot1x global and port settings to their
default values.
Command Mode
Global Configuration
Example
dot1x timeout tx-period Sets the time period during an
authentication session that the switch
waits before re-transmitting an EAP
packet
IC 22-41
show dot1x Shows all dot1x related information PE 22-41
Console(config)#dot1x system-auth-control
Console(config)#
Console(config)#dot1x default
Console(config)#
Table 22-12 802.1X Port Authentication Commands (Continued)
Command Function Mode Page