SMC Networks TigerAccess SMC7816M - Manual (Page 720)

VDSL C
OMMANDS
29-38
Example
The following applies the line profile named southport to all VDSL ports.
band-plan
This command sets the frequency bands used for VDSL signals based on a
set of predefined plans. Use the no form to restore the default status.
Syntax
band-plan value
no band-plan
value – Index for a predefined band plan.
(See Table 29-3, “VDSL2 Band Plans,” on page 29-5.)
Default Setting
5 (100/100)
Command Mode
VDSL Line Profile
Command Usage
The band plan options provided by this command are listed in
Table 29-3, “VDSL2 Band Plans,” on page 29-5. The first field in the
band plan designator indicates the ITU standard, the second field
indicates the lower frequency bound, and the third field indicates the
upper frequency bound. The band plans are also described by ITU-T
Standards G.9932.
Example
This example sets the band plan to 998-640-30000.
Related Commands
lre band-plan (29-4)
Console(config)#lre line-profile southport
Console(config)#
Console(config-line-profile)#band-plan 5
Console(config-line-profile)#