SMC Networks TigerAccess SMC7816M - Manual (Page 714)

VDSL C
OMMANDS
29-32
Related Commands
lre datarate (29-26)
lre retraining
This command manually initiates the rate adaptation method to find the
optimal transmission rate based on existing line conditions. Use the no
form to disable this feature.
Default
Disabled
Command Mode
Interface Configuration (VDSL Port)
Command Usage
• This command can be used if auto-retraining has been disabled with
the no lre auto-retraining command (page 29-31), and the signal
quality or link on a port has dropped. The lre-retraining command
will initiate rate adaptation and select the optimal transmission rate
based on existing line conditions and the bounds set by the lre
datarate command (page 29-26).
• Note that it might take several minutes to retrain a port, and for the
CLI to allow further command input.
Example
Related Commands
lre datarate (29-26)
Console(config)#interface ethernet 1/1
Console(config-if)#lre retraining
Console(config-if)#