SMC Networks TigerAccess SMC7816M - Manual (Page 905)

M
ULTICAST
VLAN R
EGISTRATION
C
OMMANDS
35-29
show mvr
This command shows information about the global MVR configuration
settings when entered without any keywords, the interfaces attached to the
MVR VLAN using the interface keyword, or the multicast groups
assigned to the MVR VLAN using the members keyword.
Syntax
show mvr [interface [interface] | members [ip-address]]
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-18)
• port-channel channel-id (Range: 1-12)
• ip-address - IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
Default Setting
Displays global configuration settings for MVR when no keywords are
used.
Command Mode
Privileged Exec
Command Usage
Enter this command without any keywords to display the global
settings for MVR. Use the interface keyword to display information
about interfaces attached to the MVR VLAN. Or use the members
keyword to display information about multicast groups assigned to the
MVR VLAN.