SMC Networks TigerAccess SMC7816M - Manual (Page 503)

E
VENT
L
OGGING
C
OMMANDS
20-43
logging trap
This command enables the logging of system messages to a remote server,
or limits the syslog messages saved to a remote server based on severity.
Use this command without a specified level to enable remote logging. Use
the no form to disable remote logging.
Syntax
logging trap [level]
no logging trap
level - One of the syslog severity levels listed in the table on
page 20-40. Messages sent include the selected level up through
level 0.
Default Setting
Disabled
Level 7 - 0
Command Mode
Global Configuration
Command Usage
Using this command with a specified level enables remote logging and
sets the minimum severity level to be saved.
Using this command without a specified level also enables remote
logging, but restores the minimum severity level to the default.
Example
Console(config)#logging trap 4
Console(config)#