SMC Networks TigerAccess SMC7816M - Manual (Page 704)

VDSL C
OMMANDS
29-22
Example
The following disables all tone beneath 640 kHz on the upstream band
plan.
Related Commands
show lre tone (29-71)
lre max-power
This command sets the maximum aggregate downstream or upstream
power. Use the no form to restore the default setting.
Syntax
lre max-power {down | up} value
no lre max-power {down | up}
• down – Downstream bands.
• up – Upstream bands.
• value – Maximum aggregate power. (Range: 0-255, in units of 0.25
dBm)
Default Setting
255 (63.75 dBm)
Command Mode
Global Configuration
Interface Configuration (VDSL Port)
Command Usage
Enter this command in global configuration mode to set the maximum
aggregate power for all VDSL ports, or in interface mode to set it for a
specific VDSL port.
Console(config)#
Console(config)#lre tone tx 2
Console(config)#