Oam remote upgrade firmware, Oam remote firmware active, Oam remote upgrade firmware , a – SMC Networks TigerAccess SMC7816M User Manual
Page 772: E oam remote firmware active, Vdsl c
VDSL C
OMMANDS
29-90
Related Commands
oam remote upgrade firmware (page 29-90)
oam remote firmware active (page 29-90)
oam remote upgrade firmware
This command copies BME firmware to the CPE.
Command Mode
Interface Configuration
Command Usage
• BME indicates the Burst Mode Engine used for digital signal
processing.
• Two firmware files can be stored on a CPE. The oam remote
firmware upgrade command copies firmware to buffer space for the
inactive version.
• After using the copy tftp firmware command (page 29-87) to copy
BME firmware for CPEs to reserved buffer space in the switch, use
the oam remote upgrade firmware command to transfer the
firmware to a remote CPE, and then use the oam remote firmware
active command (page 29-90) to activate the new firmware.
Example
Refer to the example under copy tftp firmware (page 29-87).
Related Commands
copy tftp firmware (page 29-87)
oam remote firmware active (page 29-90)
oam remote firmware active
This command activates the alternate (inactive) BME firmware version on
the CPE.
Command Mode
Interface Configuration