SMC Networks TigerAccess SMC7816M - Manual (Page 907)

M
ULTICAST
VLAN R
EGISTRATION
C
OMMANDS
35-31
The following displays information about the interfaces attached to the
MVR VLAN:
Console#show mvr interface
=======================================================
MVR domain : 1
Port Type Status Immediate Leave
------- -------- ------------- ---------------
eth1/1 SOURCE ACTIVE/UP Disable
eth1/2 RECEIVER ACTIVE/UP Disable
eth1/5 RECEIVER INACTIVE/DOWN Disable
eth1/6 RECEIVER INACTIVE/DOWN Disable
eth1/7 RECEIVER INACTIVE/DOWN Disable
=======================================================
MVR domain : 2
Port Type Status Immediate Leave
------- -------- ------------- ---------------
=======================================================
MVR domain : 3
Port Type Status Immediate Leave
------- -------- ------------- ---------------
Console#
Table 35-8 show mvr interface - display description
Field Description
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
Status Shows the MVR status and interface status. MVR status for
source ports is “ACTIVE” if MVR is globally enabled on the
switch. MVR status for receiver ports is “ACTIVE” only if
there are subscribers receiving multicast traffic from one of
the MVR groups, or a multicast group has been statically
assigned to an interface.
Immediate Leave Shows if immediate leave is enabled or disabled.