SMC Networks TigerAccess SMC7816M - Manual (Page 80)

C
ONFIGURING THE
S
WITCH
3-12
IPv6 Mapping Assigns IPv6 traffic classes to one of the
Class-of-Service values 14-15
IP Port Priority Status Globally enables or disables IP Port Priority 14-16
IP Port Priority Sets TCP/UDP port priority, defining the socket
number and associated class-of-service value 14-11
QoS 15-1
DiffServ Configure QoS classification criteria and service
policies 15-2
Class Map Creates a class map for a type of traffic 15-3
Policy Map Creates a policy map for multiple interfaces 15-6
Service Policy Applies a policy map defined to an ingress port 15-10
IGMP Snooping 16-2
IGMP Configuration Enables multicast filtering; configures parameters for
multicast query 16-4
Multicast Router
Port Information
Displays the ports that are attached to a neighboring
multicast router for each VLAN ID 16-7
Static Multicast Router
Port Configuration
Assigns ports that are attached to a neighboring
multicast router 16-8
IP Multicast Registration
Table
Displays all multicast groups active on this switch,
including multicast IP addresses and VLAN ID 16-9
IGMP Member
Port Table
Indicates multicast addresses associated with the
selected VLAN 16-9
IGMP Immediate Leave
Table
Immediately deletes a member port of a multicast
service if a leave packet is received 16-13
IGMP Filter
Configuration
Enables IGMP filtering and creates profile groups 16-15
IGMP Profile Group
Configuration
Sets IGMP filter profile groups and access mode 16-16
IGMP Filter/Throttling
Port Configuration
Assigns IGMP filter profiles to port interfaces and
sets throttle mode 16-18
Table 3-2 Switch Main Menu (Continued)
Menu Description Page