Figure 14-10 ip port priority -17, 3/4 p – SMC Networks TigerAccess SMC7816M User Manual
Page 383
L
AYER
3/4 P
RIORITY
S
ETTINGS
14-17
Click Priority, IP Port Priority. Enter the port number for a network
application in the IP Port Number box and the new CoS value in the Class
of Service box, and then click Apply.
Figure 14-10 IP Port Priority
CLI – The following example globally enables IP Port Priority service on
the switch, maps HTTP traffic (on port 1) to CoS value 0, and then
displays the IP Port Priority settings.
* Mapping specific values for IP Port Priority is implemented as an interface config-
uration command, but any changes will apply to the all interfaces on the switch.
Console(config)#map ip port
Console(config)#interface ethernet 1/1
Console(config-if)#map ip port 80 cos 0
Console(config-if)#end
Console#show map ip port ethernet 1/5
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 1 80 0
Console#